Cold Trap Bath BGI2C1 (BBCT-2501)

Cold Trap Bath
  • Sea, Air, Door to Door Shipping
  • 1 Year Warranty
  • US & European Standards



Cold Trap Bath Immersion of Glass Condenser Max. 0.5Kg

Specifications

ModelBGI2C1
Collection methodsImmersion of Glass Condenser
Collection amountMax. 0.5Kg
Lowest temp-40°C
Safety functionDelayed Start of Compressor, Leakage, Overcurrent, Overvoltage Protection
Refrigerating capacityAir Cooling 150W R404A
Cover Interface materialImport PC
Tank Interior dimension (mm)φ220mmx180mm
Capacity (L)5L
PC capping diameterφ50.3mm 3 holes
Condenser diameterφ10mm (Match the Diaphragm Pump)
Interior dimension WxDxH (mm)315x500x570
Power850W
Electrical requirement220V/50Hz

Description

In vacuum applications,a cold trap is a device that condenses all vapors(except the
permanent gases) into a liquid or solid. The main purpose is to prevent vapors being
produced by an experiment from entering the vacuum pump where they would condense
and contaminate it. Clod traps can also cool surfaces or baffles to prevent oil vapors flowing
from a pump into a chamber. In such a case,a baffle or section of pipe containing a number
of cooled vanes, will be attached to the inlet of an existing pumping system.

Features

Improve pump working efficiency:
1. The low temperature of the cold trap can condense the water vapor directly in the cold
trap, thus greatly improving the working efficiency of the vacuum pump.

Protect vacuum pump:
1. Pumps that use oil either as their working fluid (diffusion pumps), or as their lubricant (mechanical rotary pumps), are often the sources of contamination in vacuum systems.
Placing a cold trap at the mouth of such a pump greatly lowers the risk that oil vapors will
back stream into the cavity.

LCD PID controller:
1. P.I.D temperature controller provides accurate and reliable temperature control.
2. Large LCD display screen and interface provides for user-friendly operation.

Energy conservation and environmental protection:
1. Non-freon refrigeration improve cooling efficiency, lower noise, longer life time ensures the stability for long time running.

Safety:
Temperature deviation alarm.
Compressor over current, over heat, over load protection.

Design with
3 glass trap installation.
Upside opened a glass trap.
Easy internal observation with PC Transparent Cover.
Drain valve for easy discharge of collected liquid.
S304 internal bath can be used to do water or ethanol cooling experiments. If equipped
with glass condenser, it also can be used to deal with acid or organic solvents.

Option:
1. RS 485 connector and USB connector can connect computer to save the data.

Cold Trap Diagram:
Cold Trap Diagram: Cold Trap Bath Immersion of Glass Condenser Max. 0.5Kg




Request Quote
Name*:
Email*:
I am *: Distributor End User Others
WhatsApp :
Product :
Subject :
Message :