Economical
Water Content Tester
Power supply: AC (220±10%) V, 50Hz
Total power consumption: ≤ 2200W
Heating control: Continuously adjustable by a silicon knob, manual
Ambient temperature: (15-35) °C
Economical
Dropping Point Tester
Oil Bath: 600ml Beaker
Grease Cup: Chrome plated brass, inner diameter 9.92mm, oil dripping hole 2.8mm, cup height 12mm
Test Tube: Heat resistant borosilicate glass tube with edge, inner diameter 11.1mm to 12.7mm, with three grooves 19mm from bottom
Stirring motor: 60 R/min
Economical
Cleveland Open-cup Flash Point Tester
Ignition source: Coal gas (or civil gas)
Nozzle aperture: About 0.8 mm
Thermometer: (-6 ~ 400) °C. Scale is 2 °C
Ambient temperature: (15 ~ 35) °C
Standard
Distillation Tester
Distillation flask: 125 ml
Water bath temperature controlling range: (ambient temp. +10) °C ~ 60°C
Water bath temperature controlling accuracy: ±0.5°C
Receiving cylinder: 100 ml, scale division 1 ml
Standard
Pensky-martens Closed-cup Flash Point Tester
Inner diameter: 50.7 mm ~ 50.8 mm
Depth: 55.7 mm ~ 56.0 mm
The scribed line depth of capacity of testing oil: 33.9mm ~ 34.3mm
Capacity of testing oil: About 70ml
Standard
Crude Petroleum Water Content Tester
Distillation flask: 1000 ml
Receiver: 5ml, graduation is 0.05 ml
Condenser: 400mm±5mm
Heater: heating mantle cap, 500Wx2, continuous adjustment
Standard
Cleveland Open Cup Flash Point Tester
Applicable standards: GB/T3536, ASTM D92, ISO2592
Heating method: Sealed stove, imported heating wire
Temperature adjusting method: Imported solid regulator
Scanning method: Automatic scanning and igniting
Standard
Equilibrium Boiling Point Tester
Applicable standards: ASTM D1120, SH/T0089
Heating mode: electric heating-jacket
Refrigeration mode: tap water circulation
Temperature control mode: solid state voltage regulator (SSVD)
Standard
Kinematic Viscosity Tester
Capillary viscometer tubes: 6 pieces total; inner diameters: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm
Temperature control range: Ambient to 100°C
Temperature control accuracy: ±0.1°C
Temperature sensor: RTD, Pt100
Advanced
Mechanical Impurity Tester
Temperature control range for water bath: Room temperature ~ 90°C, adjustable
Bath temperature display: Digitally displayed by LED
Temperature control accuracy for water bath: ±1°C
Temperature control range for funnel: Room temperature ~ 90°C, adjustable
Advanced
Ash Content Tester
Box-type heating furnace:
--Rated temperature: 1000°C
--Temperature rising time for empty furnace: ≤50 min
--Power consumption for empty furnace: ≤800W
Advanced
Carbon Residue Tester
Test furnace: One furnace with four holes
Heating mode: Electric furnace
Temp. Control range: (0 ~ 520)°C
Temp. Control accuracy: ±5°C
Advanced
Density Tester
Capacity of cylinder: 500ml
Range: (Ambient +5) °C to 100°C
Accuracy: ±0.2°C
Sensor: Pt100
Advanced
Petroleum Products Color Tester
Light source: 220 V, 100 W
temperature: 2750±50 K
Observation lens composition: concave mirror and separated bar
Standard color dial: 26 pieces of Φ14 light holes
Advanced
Kinematic Viscosity Tester
Capillary viscometer tubes: 6 pieces in total; inner diameter for each: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm
Temperature control range: Ambient to 100°C
Temperature control accuracy: ±0.1°C
Temperature sensor: RTD, Pt100
Advanced
Distillation Tester
Distillation flask: 125 ml
Receiving cylinder: 100 ml, scale division 1 ml
Temperature controller range: (Ambient +10)°C ~ 60°C
Temperature controller accuracy: ±0.5°C
Advanced
Distillation Tester (low-temperature)
Distillation flask: 125 ml
Receiving cylinder: 100 ml, scale division 1 ml
Heating power: ≤2300W
Electric furnace heating power: 1300W
Advanced
Cleveland Open-cup Flash Point Tester
Ignition source: Coal gas (or civil gas)
Flame diameter: 3.2 mm ~ 4.8 mm
Temperature range: 0 °C ~ 400 °C
Display accuracy: 0.1 °C
Advanced
Pensky-martens Closed-cup Flash Point Tester
Heating device: (1) The furnace is silicon carbide material. Power is 600W. (2) The heating power is adjustable from 0W to 600W
Heating rate: Procedure A: (5~6)°C/min, Procedure B: (1~1.5)°C/min
Stirring device: (1) Stirring motor: BYGH101 stepping motor. (2) Driving mode: flexible shaft. (3) Shaft size: 8mmx40mm
Stirring rate: Procedure A: (90~120) rpm, Procedure B: (250±10) rpm
Premium
Low Temperaturetester
Working chamber: Two test baths in one chamber. The temperatures are the same.
Range: Ambient to -70°C
Accuracy: ±0.5°C
Refrigeration: New-type refrigeration compressor
Premium
Aniline Point Tester
Temperature range: Ambient to 200°C
Temperature precision: ≤0.5°C
Heating power: ≤2100W
Ambient temperature: 15°C ~ 35°C
Premium
Demulsibility Characteristics Tester
Timing range: 1s~9min59s
Stirring rate: (1500±15) r/min
Temperature range: (Room temp.+5~99.9)°C
Temperature control accuracy: ±1°C
Premium
Water Separability Tester
Applicable Standards: GB/T7305, ASTM D1401, ISO6614
Temperature Controlling Method: Imported PID digital display temperature controller
Temperature Controlling Accuracy: Ambient ~ 100°C ±0.1°C
Heating Method: Water bath
Premium
Copper Strip Corrosion Tester
Sample testing positions: Four positions
Sample quantity at one test: 4 pieces ~ 12 pieces
Temperature range: Ambient to 100°C, can be set at will
Temperature control accuracy: ±1°C
Premium
Vapor Pressure Tester (reid Method)
Temperature control range of bath: (Room temp.~90)°C
Temperature control accuracy of bath: ±0.1°C
Accuracy of pressure meter: 0.4% F·S
Ambient temperature: 15°C ~ 35°C
Premium
Distillation Tester (low-temperature)
Distillation flask: 125 ml
Receiving cylinder: 100 ml, scale division 1 ml
Thermometer: (-2~300)°C and (-2~400)°C, division value 1°C
Furnace heating power: 1300W x 2
Premium
Foaming Characteristic Tester
Temperature control range for high temperature bath: (Room temp.~99.9)°C
Temperature control range for low temperature bath: (5~99.9)°C
Temperature control accuracy: ±0.5°C
Air flow rate: (94±5) ml/min, adjustable
Premium
Density And Specific Gravity Testing Equipment
Applicable standards: GB/T1884 ISO3675 ASTM D1298
Working unit: double units
Refrigeration method: Air compressor
Temperature controlling method: Imported digital PID
Premium
Engine Coolant Foaming Tendency Analyzer
Applicable standards: ASTM D1881, SH/T0066
Temperature controlling range: 88±1°C
Velocity of flow: 1000±25ml/min
Working units: 2 holes
Premium
Kinematic Viscosity Tester
Capillary viscometer tubes: 6 pieces total; inner diameters: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm
Amount of capillary viscometer tubes: 4 capillary viscometers
Bath capacity: 20L
Working condition: 15°C ~ 35°C
Premium
Vacuum Distillation Tester
Capacity of buffer vessel: 1000 ml
Heating power (distillation flask): 1300W
Heating power (receiver): 350W
Heating furnace of distillation flask: (0 ~ 1300)W, continuously adjustable
Premium
Existent Gum Tester
Sample positions: 5 positions
Dimension of sample position: φ51mmx70mm
Working temperature: (160 ~ 165)°C
Dimension of evaporation bath: φ260mmx130mm
Premium
Copper Strip Test Bath Corrosiveness Testing Equipment
Applicable standards: GB/T5096, ASTM D130, ISO3735, DIN51789
Temperature controlling method: imported PID digital display temperature controller
Temperature controlling accuracy: room temperature~150±0.1°C
Heating method: oil bath
Premium
Automatic Demulsibility Characteristics Tester
Testing hole: 4 sample
Stirring rate: (1500±15) r/min
Stirring time: (0~99) min
Timing: (0~99) h
Premium
Hydraulic Oil Thermal Stability Tester
Applicable Standard: SH/T 0209
Temperature Control Method: Imported PID Digital Temperature Controller
Temperature Control Accuracy: Room temperature to 200°C ± 0.1°C
Heating Method: Metal Bath Heating
Elite
Engine Coolants Corrosion Tester
Applicable standards: ASTM D1384, SH/T0085
Heating mode: electric heating pipe
Temperature control mode: digital PID temperature controller
Pressure display: Pressure gauge
Elite
Automatic Coc Flash Point Tester
Mode: Electric ignition
Ignition mode::
--Gas flame diameter: 3.2 mm ~ 4.8 mm
Flash point determination::
Elite
Automatic Cleveland Open Cup Flash Point Tester, Cleveland Open-cup Flash Point Tester
Ignition mode:: Electric ignition
Diameter of igniter: 0.7 mm ~ 0.8 mm
Heating rate::
Initial heating: 14 ~ 17 °C/min
Elite
Vacuum Distillation Tester
Heating furnace of distillation flask: (0 ~ 1300)W, adjustable
Setting range of vacuum residual pressure: (2 ~ 50) mmHg
Accuracy of vacuum residual pressure: ±0.5 mmHg
Heating power of receiver: 350W, automatically controlled
Elite
Lubricating Oil Air Release Value Tester
Applicable standard: SH/T0308, ASTM D3427, DIN51585, NFT60151, IP135
Power supply: AC 220V ±10%, 50Hz ±5%
Heating mode: Electric bar
Temperature controlling range: Ambient ~ 80 ±1°C; if using silicon oil, it can reach higher temperature
Elite
Rust Prevention Tester
Applicable standards: ASTM D665, GB/T11143
Temperature control method: Imported digital PID temperature controller
Temperature control accuracy: 60 ± 0.1°C
Heating method: Electrical heating rod
Elite
Multifunctional Low Temperature Tester
Cold bath temperature control::
--Chamber I: -17°C ~ 0°C, accuracy ±0.5°C, temperatures in two cold baths are the same.
--Chamber II: -30°C
--Chamber III: -51°C ~ -34°C, accuracy ±0.5°C, temperatures in two cold baths are the same.
Elite
Foam Tendency Bath Instrument With Cooler
Applicable standards: GB/T12579, ASTM D892, ISO6247, NFT60129
Working unit: 4 units
Heating method: oil bath
Temperature controlling method: Imported digital PID
Elite
Distillate Fuel Oils Oxidation Stability Tester
Sample quantity: It can determine 6 samples at a time
Temperature measuring component: Thermal resistance
Temperature control mode: Automatically controlled by digital temperature controller
Temperature control range: Ambient to 100°C
Elite
Hydrolytic Stability Tester
Applicable standards: SH/T0301, ASTM D2619
Heating mode: Stainless steel electrical heating tube
Heating power: 1.2KW
Temperature control range: Ambient~93°C
Elite
Water Washout Properties Tester
Applicable standard: SH/T0109, ASTM D1264
Temperature control accuracy: ±0.1°C
Temperature control range: Ambient~100°C
Working temperature: 37.8 ± 0.1°C and 79 ± 0.1°C
Elite
Automatic Pmcc Flash Point Tester
Heating rate: Procedure A: (5 ~ 6) °C/min
Heating rate: Procedure B: (1 ~ 1.5) °C/min
Heating rate: Procedure C: (3.0 ± 0.5) °C/min
Stirring rate: Procedure A and C: (90 ~ 120) rpm
Elite
High Temperature Foaming Apparatus
Applicable Standards: ASTM D6082, SH/T0722
Temperature Control Method: Imported PID digital temperature controller
Temperature Control Accuracy: 150 ± 0.1°C
Heating Method: Liquid bath heating
Elite
Oxidation Stability Tester
Applicable standards: ASTM D2274, ISO12205, SH/T0175
Temperature control method: Digital PID temperature controller
Circulating method: Magnetic pump circulation
Temperature control range: 20-95°C ±0.2°C
Elite
Oil Oxidation Stability Tester
Temperature control point for test bath: 140°C, 150°C
Temperature control accuracy: ±0.1°C
Range for pressure sensor: (0~1.6) MPa
Pressure accuracy: ±0.5%
Elite
Automatic Vapor Pressure Tester (reid Method)
Test bomb: Can do 3 bomb tests at the same time
Water bath temperature: 37.8°C
Pressure range: (0 ~ 200) kPa or (0 ~ 29) psi
Temperature control accuracy: ±0.1°C
Elite
Automatic Freezing Point Tester
Freezing point range: -54°C ~ 2°C
Working bath: stainless steel, double vacuum glass observing window
Cold bath measurement temperature: -70°C ~ 30°C
Temperature controlling accuracy: ±0.1°C
Elite
Liquid Petroleum Product Hydrocarbon Tester
Air supply: Nitrogen cylinder (or air compressor, compressed air bottle)
Pressure regulating range of reducing valve: (0~400) kPa
Electric agitator: Independently controlled for each way
Ultraviolet light source pipe: 1220mm in length, wavelength is 365mm±5nm
Elite
Multifunctional Pour Point Test Instrument
Applicable standards: GB/T2525, GB/T510, ASTM D97
Temperature controlling method: imported PID digital display temperature controller
Temperature controlling accuracy: -70±0.1°C
Refrigeration method: imported double compressor
Elite
Fully Automatic Cleveland Open Flash Point Meter
Applicable standards: GB/T3536, ISO2592, ASTM D92
Display mode: LCD
Display contents: Controlling temperature and expected set flash pointFault promptEvery model specifications and atmosphere setting
Measuring range: Ambient ~ 400°C
Elite
Carbon Residue Tester (micromethod)
Temperature of coke chamber: 500°C
Temperature control accuracy: ±2°C
Heating power: 1200W
Ambient temperature: 5°C ~ 35°C
Elite
Closed Cup Flash Point Tester
Applicable standards: GB/T261, ISO2719, ASTM D93, DIN51751
Display mode: LCD big screen in English
Display content: Control temperature and set temperature of expected flash point; Fault warning; Each simulated parameters and pressure setting
Measuring range: 40~370°C
Elite
Automatic Vapor Pressure Tester
Power supply: AC(220±10%)V, 50Hz
Maximum power consumption: ≤1700W
Test bomb: Can do 3 bomb tests at the same time
Water bath temperature: 37.8°C
Elite
Automatic Gasoline Oxidation Stability Tester (induction Period Method)
Heating Tube Power: ≤1000W, The actual heating power is automatically controlled by the computer
Measuring range of oxygen bomb pressure transmitter: (0 ~ 1600) kPa, accuracy: ±2%
Temperature control point of metal bath: 100.0°C ± 0.5°C
Thermometer: Mercury-in-glass thermometer, can correct coefficient as need
Elite
Rapid Low Temperature Closed Cup Flash Point Tester
Flash point measuring range: -30°C ~ +100°C
Precision of determination: Meets standard GB/T 5208
Temperature resolution: ±0.1°C
Igniting device: Electric igniting gun
Elite
Gasoline Oxidation Stability Tester
Power Supply: AC (220±10%) V, 50Hz
Total Power Consumption: 1400W
Measuring Range of Oxygen Bomb Pressure Transmitter: (0~1600) kPa, Accuracy: ±2%
Temperature Control Point of Metal Bath: 100.0°C ±0.1°C
Elite
Rapid Low Temperature Closed Cup Flash Point Tester
Flash point measuring range: -10°C ~ +100°C
Temperature resolution: ± 0.1°C
Igniting device: Electric igniting gun
Cooling mode: Semiconductor (with cold water cycle at external connection)
Elite
Thermal Stability Test Equipment
Applicable standard: ASTM D6743, DIN 51528, SH/T0680, GB/T23971, GB/T23800
Temperature control method: imported PID digital temperature controller
Temperature control range: RT~400°C
Temperature control accuracy: ± 0.1°C
Elite
Automatic Cfpp Tester
Temperature range: -70~40°C
Resolution: 0.1°C
Pressure measuring range: 0~200.0 KPa; resolution 1Pa
Filter: 363 mesh stainless steel wire mesh
Elite
Total Acid Number Tester
Burette volume: 10ml
Burette precision: ±0.1%F•S
Burette dripping time: (60±20)S(F·S)
Potential measurement range: (0~±1800.0)mV
Elite
Evaporating Loss Tester
Applicable standards: SH/T 0059; ASTM D5800 B
Temperature range: Ambient ~ 300°C
Temperature setting: Resolution accuracy ±0.1°C; temperature accuracy ±0.5°C
Heating unit: Environmentally friendly lightweight heating unit
Elite
Vacuum Distillation Tester
Temperature control range of condensate circulating water: Ambient+5°C (Min. 30°C) ~ 80°C±3°C; adjustable
Working Mode of condensate trap: Semiconductor refrigeration
Minimum temperature: ≤ - 40 °C
Absolute pressure setting: 2 mmhg, 5 mmhg, 10 mmhg, 20 mmhg, 50 mmhg
Elite
X-ray Fluorescence Sulfurin- Oil Analyzer
Oil sample quantity: 6 ml
Powder sample quantity: 3 g
Detection limit: 50 ppm
Measuring range: 0.005% ~ 5%
Elite
Automatic Engine Oils Apparent Viscosity Tester
Viscosity measurement range: 1500mPa·s ~27000mPa·s
Cold bath temperature control range: Ambient ~ -60°C
Cold bath temperature control accuracy: ±0.5°C
Stator temperature control accuracy: ±0.05°C
Elite
Automatic Lubricating Oils Oxidation Stability Tester
Test sample: Two-bomb design, can do two samples at one time. Convenient to do parallel test.
Rotation speed: (100±1)r/min
Included angle between oxygen bomb and water level: 30°
Range for pressure sensor: (0 ~ 1.6)MPa
Elite
Lubricating Greases Corrosion-preventive Properties Tester
Applicable standards: ASTM D6138
Rotating method: AC motor drive
Rotating speed: 80~85r/min
Timing method: Digital timer
Elite
Fully Automatic Quenching Medium Cooling Performance Tester
Applicable Standards: SH/T 0220, JIS K2242 (or optionally ISO 9950)
Heating Method: Electric heating wire
Temperature Control Range: 80 ± 2°C, 810 ± 2°C
Control Method: Digital Display PID Automatic Temperature Control
Elite
Low-temperature Torque Tester
Applicable standards: SH/T0338, ASTM D1478
Refrigeration method: Imported French Tecumseh compressor unit
Temperature controlling range: ambient-70°C
Temperature control: Digital timer
Elite
Automatic Distillation Tester
Temperature range of bath: 0 ~ 60°C
Temperature control precision of bath: ±0.5°C
Temperature range of receiving chamber: 0 ~ 60°C
Temperature control precision of receiving chamber: ±1°C
Elite
Automatic Freezing Point Tester
Applicable standard: SH/T0090, ASTM D1177, NFT 78102
Temperature control method: Imported PID temperature controller
Temperature control range: -70 ± 0.1°C
Refrigerator system: Imported dual air compressors
Elite
Ultraviolet Fluorescence Sulfurin-oil Analyzer
Sample injection quantity: Solid: 1-20 mg; Liquid: 5-20 μL; Gas: 1-5 mL
Determination method: Ultraviolet fluorescence method (S)
Measuring range: 5 ppm ~ 5000 ppm (High concentration should be diluted, low concentration gas sample is up to 0.1 ppm)
Temperature range: Ambient to 1150°C
Elite
Fully Automatic Distilled Oil Analyzer
Applicable standards: GB/T6536; ASTM D 86, ISO 3405;
Measuring temperature: Ambient~+400°C
Temperature controlling accuracy: +/- 0.1°C
Volume accuracy: +/- 0.1 ml
Elite
Oil Oxidation Stability Tester
Temp.controlling: Import PID temp.controller
Flow range: 8~12L/h±10%
Measuring range: 0~800 μS/cm
Resolution: 0.1μS/cm
Elite
Apparent Viscosity Tester
Applicable Standard: SH/T0703, ASTM D5481
Heating method: Electric heating rod
Test temperature: Ambient to 150°C
Temperature control accuracy: ±0.1°C
Elite
Scanning Brookfield Gelation Index Test Instrument
Power supply: AC(220±10%)V, 50Hz
Refrigeration: Semiconductor
Temperature control range: Room temperature ~ -40°C (-70°C is customized)
Temperature control accuracy: ±0.1°C
TO BE DISCONTINUED
Shear Stability Tester
Applicable standards: SH/T0103, ASTM D3945
Timing method: Automatic stroke timer
Refrigeration method: Air compressor
Temperature control range: 35±0.2°C
