Basic Water Purification System BBPS-108

Basic Water Purification System BBPS-108

  • Sea, Air, Door to Door Shipping
  • 1 Year Warranty
  • US & European Standards
This basic series is ideal for wide range of applications. It produces RO, Deionized water and Ultrapure water. The organic rejection rate is greater than 99% using reverse osmosis. The resistivity reaches up to 18.2M?.cm which completely meets the highest grade I standard.
  • Automatic microcomputer controlling system, LED real-time animation mode display.
  • Running status is showed in the LED, such as flushing, producing water, full tank, water shortage, leakage and service.
  • Power on self test, power reset, alarm when work more than 6 hours continuously, water shortage, leakage, low pressure
  • and high pressure.
Specification Features Applications
Feed Water Requirements*: 
      Water InletTap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
      Temperature5-45°C
      Pressure1.0-4.0 Kgf/cm²
Flow Procedure**PF+AC+RO+DI
Ion rejection rate96%-99% (New RO membrane)
Organic rejection rate>99% (when MW>200 Dalton)
Particles and bacteria rejection rate>99%
Bacteria<0.1 cfu/ml (with terminal filter)
Output(25°C)****30 L/hrs
Pure water outletRO and deionized water
DimensionLxWxH410x320x420 mm
Weight15 kg
Standard configurationMain body (Including 1 set of cartridges) + TDS pen+ accessory bag
Power Consumption (W)72 W
Power SupplyAC110-220 V, 50/60 Hz
Note*The feed water quality will influence the pure water’s quality and cartridges life-span. **PF:polypropylene spun fiber, AC:active carbon, RO:reverse osmosis, DI:ion exchange. ***All the specifications are tested under the situation:feed water’s TDS=200ppm, 25°C, 50psi and 15% recovery rate.
Deionized water quality: 
      Resistivity>13-17.5MΩ.cm
      Conductivity0.057-0.077µs/cm
      Particle(>0.2µm)Particle (>0.2 µm)<1/ml (with terminal filter)
Request Quote
Name*:
Email*:
I am *: Distributor End User Others
WhatsApp :
Product :
Subject :
Message :