(81) items
Go
Standard
Power supply : AC (220±10%) V, 50Hz
Total power consumption : ≤ 2200W
Heating control : Continuously adjustable by a silicon knob, manual
Ambient temperature : (15-35) °C
Relative humidity : ≤ 85%
Tester Petroleum Equipment BJO1I1 (BPTL-241)
Water Content TesterPower supply : AC (220±10%) V, 50Hz
Total power consumption : ≤ 2200W
Heating control : Continuously adjustable by a silicon knob, manual
Ambient temperature : (15-35) °C
Relative humidity : ≤ 85%
Standard
Oil Bath : 600ml Beaker
Grease Cup : Chrome plated brass, inner diameter 9.92mm, oil dripping hole 2.8mm, cup height 12mm
Test Tube : Heat resistant borosilicate glass tube with edge, inner diameter 11.1mm to 12.7mm, with three grooves 19mm from bottom
Stirring motor : 60 R/min
Working environment: Temperature : (-5 ~ 300) °C
Tester Petroleum Equipment BJO1BJ1 (BPTL-270)
Dropping Point TesterOil Bath : 600ml Beaker
Grease Cup : Chrome plated brass, inner diameter 9.92mm, oil dripping hole 2.8mm, cup height 12mm
Test Tube : Heat resistant borosilicate glass tube with edge, inner diameter 11.1mm to 12.7mm, with three grooves 19mm from bottom
Stirring motor : 60 R/min
Working environment: Temperature : (-5 ~ 300) °C
Standard
Ignition source : Coal gas (or civil gas)
Nozzle aperture : About 0.8 mm
Thermometer : (-6 ~ 400) °C. Scale is 2 °C
Ambient temperature : (15 ~ 35) °C
Relative humidity : ≤ 85 %
Tester Petroleum Equipment BJO1B1 (BPTL-232)
Cleveland Open-cup Flash Point TesterIgnition source : Coal gas (or civil gas)
Nozzle aperture : About 0.8 mm
Thermometer : (-6 ~ 400) °C. Scale is 2 °C
Ambient temperature : (15 ~ 35) °C
Relative humidity : ≤ 85 %
Standard
Distillation flask : 125 ml
Water bath temperature controlling range : (ambient temp. +10) °C ~ 60°C
Water bath temperature controlling accuracy : ±0.5°C
Receiving cylinder : 100 ml, scale division 1 ml
Ambient temperature : 15°C ~ 35°C
Tester Petroleum Equipment BJO1M1 (BPTL-245)
Distillation TesterDistillation flask : 125 ml
Water bath temperature controlling range : (ambient temp. +10) °C ~ 60°C
Water bath temperature controlling accuracy : ±0.5°C
Receiving cylinder : 100 ml, scale division 1 ml
Ambient temperature : 15°C ~ 35°C
Standard
Inner diameter : 50.7 mm ~ 50.8 mm
Depth : 55.7 mm ~ 56.0 mm
The scribed line depth of capacity of testing oil : 33.9mm ~ 34.3mm
Capacity of testing oil : About 70ml
Igniting source : Gas (or other civilian fuels)
Tester Petroleum Equipment BJO1E1 (BPTL-236)
Pensky-martens Closed-cup Flash Point TesterInner diameter : 50.7 mm ~ 50.8 mm
Depth : 55.7 mm ~ 56.0 mm
The scribed line depth of capacity of testing oil : 33.9mm ~ 34.3mm
Capacity of testing oil : About 70ml
Igniting source : Gas (or other civilian fuels)
Standard
Distillation flask : 1000 ml
Receiver : 5ml, graduation is 0.05 ml
Condenser : 400mm±5mm
Heater : heating mantle cap, 500Wx2, continuous adjustment
Ambient temperature : -10°C ~ +35°C
Tester Petroleum Equipment BJO1BO1 (BPTL-276)
Crude Petroleum Water Content TesterDistillation flask : 1000 ml
Receiver : 5ml, graduation is 0.05 ml
Condenser : 400mm±5mm
Heater : heating mantle cap, 500Wx2, continuous adjustment
Ambient temperature : -10°C ~ +35°C
Standard
Applicable standards : GB/T3536, ASTM D92, ISO2592
Heating method : Sealed stove, imported heating wire
Temperature adjusting method : Imported solid regulator
Scanning method : Automatic scanning and igniting
Heating power : 0~800W adjustable
Tester Petroleum Equipment BJL1K1 (BPTL-205)
Cleveland Open Cup Flash Point TesterApplicable standards : GB/T3536, ASTM D92, ISO2592
Heating method : Sealed stove, imported heating wire
Temperature adjusting method : Imported solid regulator
Scanning method : Automatic scanning and igniting
Heating power : 0~800W adjustable
Standard
Applicable standards : ASTM D1120, SH/T0089
Heating mode : electric heating-jacket
Refrigeration mode : tap water circulation
Temperature control mode : solid state voltage regulator (SSVD)
Total power : 500W
Tester Petroleum Equipment BJL1T1 (BPTL-222)
Equilibrium Boiling Point TesterApplicable standards : ASTM D1120, SH/T0089
Heating mode : electric heating-jacket
Refrigeration mode : tap water circulation
Temperature control mode : solid state voltage regulator (SSVD)
Total power : 500W
Standard
Capillary viscometer tubes : 6 pieces total; inner diameters: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm
Temperature control range : Ambient to 100°C
Temperature control accuracy : ±0.1°C
Temperature sensor : RTD, Pt100
Timing range : 0s ~ 9999.9s
Tester Petroleum Equipment BJO1J1 (BPTL-242)
Kinematic Viscosity TesterCapillary viscometer tubes : 6 pieces total; inner diameters: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm
Temperature control range : Ambient to 100°C
Temperature control accuracy : ±0.1°C
Temperature sensor : RTD, Pt100
Timing range : 0s ~ 9999.9s
Advanced
Temperature control range for water bath : Room temperature ~ 90°C, adjustable
Bath temperature display : Digitally displayed by LED
Temperature control accuracy for water bath : ±1°C
Temperature control range for funnel : Room temperature ~ 90°C, adjustable
Temperature control accuracy for funnel : ±2°C
Tester Petroleum Equipment BJO1BL1 (BPTL-272)
Mechanical Impurity TesterTemperature control range for water bath : Room temperature ~ 90°C, adjustable
Bath temperature display : Digitally displayed by LED
Temperature control accuracy for water bath : ±1°C
Temperature control range for funnel : Room temperature ~ 90°C, adjustable
Temperature control accuracy for funnel : ±2°C
Advanced
Box-type heating furnace :
--Rated temperature : 1000°C
--Temperature rising time for empty furnace : ≤50 min
--Power consumption for empty furnace : ≤800W
--Furnace temperature uniformity : ≤15°C
Tester Petroleum Equipment BJO1BM1 (BPTL-273)
Ash Content TesterBox-type heating furnace :
--Rated temperature : 1000°C
--Temperature rising time for empty furnace : ≤50 min
--Power consumption for empty furnace : ≤800W
--Furnace temperature uniformity : ≤15°C
Advanced
Test furnace : One furnace with four holes
Heating mode : Electric furnace
Temp. Control range : (0 ~ 520)°C
Temp. Control accuracy : ±5°C
Ambient temperature : Room temperature ~ 35°C
Tester Petroleum Equipment BJO1Z1 (BPTL-258)
Carbon Residue TesterTest furnace : One furnace with four holes
Heating mode : Electric furnace
Temp. Control range : (0 ~ 520)°C
Temp. Control accuracy : ±5°C
Ambient temperature : Room temperature ~ 35°C
Advanced
Capacity of cylinder : 500ml
Range : (Ambient +5) °C to 100°C
Accuracy : ±0.2°C
Sensor : Pt100
Dimension of constant temperature bath : Φ300mmx340mm
Tester Petroleum Equipment BJO1U1 (BPTL-253)
Density TesterCapacity of cylinder : 500ml
Range : (Ambient +5) °C to 100°C
Accuracy : ±0.2°C
Sensor : Pt100
Dimension of constant temperature bath : Φ300mmx340mm
Advanced
Light source : 220 V, 100 W
temperature : 2750±50 K
Observation lens composition : concave mirror and separated bar
Standard color dial : 26 pieces of Φ14 light holes
Color comparing tube : Φ32 mm, 120 ~ 130 mm high non-colorful flat bottom glass tube
Tester Petroleum Equipment BJO1BN1 (BPTL-274)
Petroleum Products Color TesterLight source : 220 V, 100 W
temperature : 2750±50 K
Observation lens composition : concave mirror and separated bar
Standard color dial : 26 pieces of Φ14 light holes
Color comparing tube : Φ32 mm, 120 ~ 130 mm high non-colorful flat bottom glass tube
Advanced
Capillary viscometer tubes : 6 pieces in total; inner diameter for each: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm
Temperature control range : Ambient to 100°C
Temperature control accuracy : ±0.1°C
Temperature sensor : RTD, Pt100
Timing range : 0s ~ 9999.9s
Tester Petroleum Equipment BJO1K1 (BPTL-243)
Kinematic Viscosity TesterCapillary viscometer tubes : 6 pieces in total; inner diameter for each: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm
Temperature control range : Ambient to 100°C
Temperature control accuracy : ±0.1°C
Temperature sensor : RTD, Pt100
Timing range : 0s ~ 9999.9s
Advanced
Distillation flask : 125 ml
Receiving cylinder : 100 ml, scale division 1 ml
Temperature controller range : (Ambient +10)°C ~ 60°C
Temperature controller accuracy : ±0.5°C
Temperature controller display : LED
Tester Petroleum Equipment BJO1N1 (BPTL-246)
Distillation TesterDistillation flask : 125 ml
Receiving cylinder : 100 ml, scale division 1 ml
Temperature controller range : (Ambient +10)°C ~ 60°C
Temperature controller accuracy : ±0.5°C
Temperature controller display : LED
Advanced
Distillation flask : 125 ml
Receiving cylinder : 100 ml, scale division 1 ml
Heating power : ≤2300W
Electric furnace heating power : 1300W
Thermometer : Total immersion; (-2 to 300)°C and (-2 to 400)°C; 1°C divisions
Tester Petroleum Equipment BJO1P1 (BPTL-248)
Distillation Tester (low-temperature)Distillation flask : 125 ml
Receiving cylinder : 100 ml, scale division 1 ml
Heating power : ≤2300W
Electric furnace heating power : 1300W
Thermometer : Total immersion; (-2 to 300)°C and (-2 to 400)°C; 1°C divisions
Advanced
Ignition source : Coal gas (or civil gas)
Flame diameter : 3.2 mm ~ 4.8 mm
Temperature range : 0 °C ~ 400 °C
Display accuracy : 0.1 °C
Temperature control : Single chip microcomputer
Tester Petroleum Equipment BJO1C1 (BPTL-233)
Cleveland Open-cup Flash Point TesterIgnition source : Coal gas (or civil gas)
Flame diameter : 3.2 mm ~ 4.8 mm
Temperature range : 0 °C ~ 400 °C
Display accuracy : 0.1 °C
Temperature control : Single chip microcomputer
Advanced
Heating device : (1) The furnace is silicon carbide material. Power is 600W. (2) The heating power is adjustable from 0W to 600W
Heating rate : Procedure A: (5~6)°C/min, Procedure B: (1~1.5)°C/min
Stirring device : (1) Stirring motor: BYGH101 stepping motor. (2) Driving mode: flexible shaft. (3) Shaft size: 8mmx40mm
Stirring rate : Procedure A: (90~120) rpm, Procedure B: (250±10) rpm
Internal diameter : 50.7mm ~ 50.8mm
Tester Petroleum Equipment BJO1F1 (BPTL-237)
Pensky-martens Closed-cup Flash Point TesterHeating device : (1) The furnace is silicon carbide material. Power is 600W. (2) The heating power is adjustable from 0W to 600W
Heating rate : Procedure A: (5~6)°C/min, Procedure B: (1~1.5)°C/min
Stirring device : (1) Stirring motor: BYGH101 stepping motor. (2) Driving mode: flexible shaft. (3) Shaft size: 8mmx40mm
Stirring rate : Procedure A: (90~120) rpm, Procedure B: (250±10) rpm
Internal diameter : 50.7mm ~ 50.8mm
Premium
Working chamber : Two test baths in one chamber. The temperatures are the same.
Range : Ambient to -70°C
Accuracy : ±0.5°C
Refrigeration : New-type refrigeration compressor
Ambient temperature : ≤30°C
Tester Petroleum Equipment BJO1V1 (BPTL-254)
Low TemperaturetesterWorking chamber : Two test baths in one chamber. The temperatures are the same.
Range : Ambient to -70°C
Accuracy : ±0.5°C
Refrigeration : New-type refrigeration compressor
Ambient temperature : ≤30°C
Premium
Temperature range : Ambient to 200°C
Temperature precision : ≤0.5°C
Heating power : ≤2100W
Ambient temperature : 15°C ~ 35°C
Relative humidity : ≤ 85%
Tester Petroleum Equipment BJO1BY1 (BPTL-275)
Aniline Point TesterTemperature range : Ambient to 200°C
Temperature precision : ≤0.5°C
Heating power : ≤2100W
Ambient temperature : 15°C ~ 35°C
Relative humidity : ≤ 85%
Premium
Timing range : 1s~9min59s
Stirring rate : (1500±15) r/min
Temperature range : (Room temp.+5~99.9)°C
Temperature control accuracy : ±1°C
Ambient temperature : 15°C ~ 35°C
Tester Petroleum Equipment BJO1CB1 (BPTL-260)
Demulsibility Characteristics TesterTiming range : 1s~9min59s
Stirring rate : (1500±15) r/min
Temperature range : (Room temp.+5~99.9)°C
Temperature control accuracy : ±1°C
Ambient temperature : 15°C ~ 35°C
Premium
Applicable Standards : GB/T7305, ASTM D1401, ISO6614
Temperature Controlling Method : Imported PID digital display temperature controller
Temperature Controlling Accuracy : Ambient ~ 100°C ±0.1°C
Heating Method : Water bath
Total Power : 1.5KW
Tester Petroleum Equipment BJL1BC1 (BPTL-212)
Water Separability TesterApplicable Standards : GB/T7305, ASTM D1401, ISO6614
Temperature Controlling Method : Imported PID digital display temperature controller
Temperature Controlling Accuracy : Ambient ~ 100°C ±0.1°C
Heating Method : Water bath
Total Power : 1.5KW
Premium
Sample testing positions : Four positions
Sample quantity at one test : 4 pieces ~ 12 pieces
Temperature range : Ambient to 100°C, can be set at will
Temperature control accuracy : ±1°C
Time controlling range : 1 minute ~ 24 hours, can be set at will
Tester Petroleum Equipment BJO1Y1 (BPTL-257)
Copper Strip Corrosion TesterSample testing positions : Four positions
Sample quantity at one test : 4 pieces ~ 12 pieces
Temperature range : Ambient to 100°C, can be set at will
Temperature control accuracy : ±1°C
Time controlling range : 1 minute ~ 24 hours, can be set at will
Premium
Temperature control range of bath : (Room temp.~90)°C
Temperature control accuracy of bath : ±0.1°C
Accuracy of pressure meter : 0.4% F·S
Ambient temperature : 15°C ~ 35°C
Relative humidity : ≤ 85%
Tester Petroleum Equipment BJO1BE1 (BPTL-264)
Vapor Pressure Tester (reid Method)Temperature control range of bath : (Room temp.~90)°C
Temperature control accuracy of bath : ±0.1°C
Accuracy of pressure meter : 0.4% F·S
Ambient temperature : 15°C ~ 35°C
Relative humidity : ≤ 85%
Premium
Distillation flask : 125 ml
Receiving cylinder : 100 ml, scale division 1 ml
Thermometer : (-2~300)°C and (-2~400)°C, division value 1°C
Furnace heating power : 1300W x 2
Condenser temp. control range : 0°C to 60°C
Tester Petroleum Equipment BJO1O1 (BPTL-247)
Distillation Tester (low-temperature)Distillation flask : 125 ml
Receiving cylinder : 100 ml, scale division 1 ml
Thermometer : (-2~300)°C and (-2~400)°C, division value 1°C
Furnace heating power : 1300W x 2
Condenser temp. control range : 0°C to 60°C
Premium
Temperature control range for high temperature bath : (Room temp.~99.9)°C
Temperature control range for low temperature bath : (5~99.9)°C
Temperature control accuracy : ±0.5°C
Air flow rate : (94±5) ml/min, adjustable
Timer : 5min and 10min, accurate to second
Tester Petroleum Equipment BJO1BC1 (BPTL-262)
Foaming Characteristic TesterTemperature control range for high temperature bath : (Room temp.~99.9)°C
Temperature control range for low temperature bath : (5~99.9)°C
Temperature control accuracy : ±0.5°C
Air flow rate : (94±5) ml/min, adjustable
Timer : 5min and 10min, accurate to second
Premium
Applicable standards : GB/T1884 ISO3675 ASTM D1298
Working unit : double units
Refrigeration method : Air compressor
Temperature controlling method : Imported digital PID
Temperature controlling accuracy : ±0.1°C
Tester Petroleum Equipment BJL1P1 (BPTL-213)
Density And Specific Gravity Testing EquipmentApplicable standards : GB/T1884 ISO3675 ASTM D1298
Working unit : double units
Refrigeration method : Air compressor
Temperature controlling method : Imported digital PID
Temperature controlling accuracy : ±0.1°C
Premium
Applicable standards : ASTM D1881, SH/T0066
Temperature controlling range : 88±1°C
Velocity of flow : 1000±25ml/min
Working units : 2 holes
Pressure display : pressure gauge
Tester Petroleum Equipment BJL1R1 (BPTL-219)
Engine Coolant Foaming Tendency AnalyzerApplicable standards : ASTM D1881, SH/T0066
Temperature controlling range : 88±1°C
Velocity of flow : 1000±25ml/min
Working units : 2 holes
Pressure display : pressure gauge
Premium
Capillary viscometer tubes : 6 pieces total; inner diameters: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm
Amount of capillary viscometer tubes : 4 capillary viscometers
Bath capacity : 20L
Working condition : 15°C ~ 35°C
Relative humidity : ≤ 85%
Tester Petroleum Equipment BJO1L1 (BPTL-244)
Kinematic Viscosity TesterCapillary viscometer tubes : 6 pieces total; inner diameters: 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm
Amount of capillary viscometer tubes : 4 capillary viscometers
Bath capacity : 20L
Working condition : 15°C ~ 35°C
Relative humidity : ≤ 85%
Premium
Capacity of buffer vessel : 1000 ml
Heating power (distillation flask) : 1300W
Heating power (receiver) : 350W
Heating furnace of distillation flask : (0 ~ 1300)W, continuously adjustable
Max. residual pressure : 2 mmHg
Tester Petroleum Equipment BJO1R1 (BPTL-250)
Vacuum Distillation TesterCapacity of buffer vessel : 1000 ml
Heating power (distillation flask) : 1300W
Heating power (receiver) : 350W
Heating furnace of distillation flask : (0 ~ 1300)W, continuously adjustable
Max. residual pressure : 2 mmHg
Premium
Sample positions : 5 positions
Dimension of sample position : φ51mmx70mm
Working temperature : (160 ~ 165)°C
Dimension of evaporation bath : φ260mmx130mm
Temperature control method : Automatic
Tester Petroleum Equipment BJO1BD1 (BPTL-263)
Existent Gum TesterSample positions : 5 positions
Dimension of sample position : φ51mmx70mm
Working temperature : (160 ~ 165)°C
Dimension of evaporation bath : φ260mmx130mm
Temperature control method : Automatic
Premium
Applicable standards : GB/T5096, ASTM D130, ISO3735, DIN51789
Temperature controlling method : imported PID digital display temperature controller
Temperature controlling accuracy : room temperature~150±0.1°C
Heating method : oil bath
Timing method : digital timer
Tester Petroleum Equipment BJL1O1 (BPTL-211)
Copper Strip Test Bath Corrosiveness Testing EquipmentApplicable standards : GB/T5096, ASTM D130, ISO3735, DIN51789
Temperature controlling method : imported PID digital display temperature controller
Temperature controlling accuracy : room temperature~150±0.1°C
Heating method : oil bath
Timing method : digital timer
Premium
Testing hole : 4 sample
Stirring rate : (1500±15) r/min
Stirring time : (0~99) min
Timing : (0~99) h
Temperature range : (Room temp.~110)°C
Tester Petroleum Equipment BJO1BB1 (BPTL-261)
Automatic Demulsibility Characteristics TesterTesting hole : 4 sample
Stirring rate : (1500±15) r/min
Stirring time : (0~99) min
Timing : (0~99) h
Temperature range : (Room temp.~110)°C
Elite
Applicable Standard : SH/T 0209
Temperature Control Method : Imported PID Digital Temperature Controller
Temperature Control Accuracy : Room temperature to 200°C ± 0.1°C
Heating Method : Metal Bath Heating
Timing Method : Digital Timer
Tester Petroleum Equipment BJL1Z1 (BPTL-216)
Hydraulic Oil Thermal Stability TesterApplicable Standard : SH/T 0209
Temperature Control Method : Imported PID Digital Temperature Controller
Temperature Control Accuracy : Room temperature to 200°C ± 0.1°C
Heating Method : Metal Bath Heating
Timing Method : Digital Timer
Elite
Applicable standards : ASTM D1384, SH/T0085
Heating mode : electric heating pipe
Temperature control mode : digital PID temperature controller
Pressure display : Pressure gauge
Working units : 3, can extend to 4-6
Tester Petroleum Equipment BJL1V1 (BPTL-224)
Engine Coolants Corrosion TesterApplicable standards : ASTM D1384, SH/T0085
Heating mode : electric heating pipe
Temperature control mode : digital PID temperature controller
Pressure display : Pressure gauge
Working units : 3, can extend to 4-6
Elite
Mode : Electric ignition
Ignition mode: :
--Gas flame diameter : 3.2 mm ~ 4.8 mm
Flash point determination: :
--Range : Ambient to 400°C
Tester Petroleum Equipment BJO1CA1 (BPTL-234)
Automatic Coc Flash Point TesterMode : Electric ignition
Ignition mode: :
--Gas flame diameter : 3.2 mm ~ 4.8 mm
Flash point determination: :
--Range : Ambient to 400°C
Elite
Ignition mode: : Electric ignition
Diameter of igniter : 0.7 mm ~ 0.8 mm
Heating rate: :
Initial heating : 14 ~ 17 °C/min
Heating_rate : It is (5-6)°C/min after reaching the preset flash point 20°C
Tester Petroleum Equipment BJO1D1 (BPTL-235)
Automatic Cleveland Open Cup Flash Point Tester, Cleveland Open-cup Flash Point TesterIgnition mode: : Electric ignition
Diameter of igniter : 0.7 mm ~ 0.8 mm
Heating rate: :
Initial heating : 14 ~ 17 °C/min
Heating_rate : It is (5-6)°C/min after reaching the preset flash point 20°C
Elite
Heating furnace of distillation flask : (0 ~ 1300)W, adjustable
Setting range of vacuum residual pressure : (2 ~ 50) mmHg
Accuracy of vacuum residual pressure : ±0.5 mmHg
Heating power of receiver : 350W, automatically controlled
Temperature control point of receiver : (20 ~ 50) °C ±3°C, adjustable
Tester Petroleum Equipment BJO1S1 (BPTL-251)
Vacuum Distillation TesterHeating furnace of distillation flask : (0 ~ 1300)W, adjustable
Setting range of vacuum residual pressure : (2 ~ 50) mmHg
Accuracy of vacuum residual pressure : ±0.5 mmHg
Heating power of receiver : 350W, automatically controlled
Temperature control point of receiver : (20 ~ 50) °C ±3°C, adjustable
Elite
Applicable standard : SH/T0308, ASTM D3427, DIN51585, NFT60151, IP135
Power supply : AC 220V ±10%, 50Hz ±5%
Heating mode : Electric bar
Temperature controlling range : Ambient ~ 80 ±1°C; if using silicon oil, it can reach higher temperature
Working pressure : 19.6 kPa
Tester Petroleum Equipment BJL1BE1
Lubricating Oil Air Release Value TesterApplicable standard : SH/T0308, ASTM D3427, DIN51585, NFT60151, IP135
Power supply : AC 220V ±10%, 50Hz ±5%
Heating mode : Electric bar
Temperature controlling range : Ambient ~ 80 ±1°C; if using silicon oil, it can reach higher temperature
Working pressure : 19.6 kPa
Elite
Applicable standards : ASTM D665, GB/T11143
Temperature control method : Imported digital PID temperature controller
Temperature control accuracy : 60 ± 0.1°C
Heating method : Electrical heating rod
Working units : 4 tubes
Tester Petroleum Equipment BJL1BG1 (BPTL-208)
Rust Prevention TesterApplicable standards : ASTM D665, GB/T11143
Temperature control method : Imported digital PID temperature controller
Temperature control accuracy : 60 ± 0.1°C
Heating method : Electrical heating rod
Working units : 4 tubes
Elite
Cold bath temperature control: :
--Chamber I : -17°C ~ 0°C, accuracy ±0.5°C, temperatures in two cold baths are the same.
--Chamber II : -30°C
--Chamber III : -51°C ~ -34°C, accuracy ±0.5°C, temperatures in two cold baths are the same.
--Chamber IV : -70°C
Tester Petroleum Equipment BJO1W1 (BPTL-255)
Multifunctional Low Temperature TesterCold bath temperature control: :
--Chamber I : -17°C ~ 0°C, accuracy ±0.5°C, temperatures in two cold baths are the same.
--Chamber II : -30°C
--Chamber III : -51°C ~ -34°C, accuracy ±0.5°C, temperatures in two cold baths are the same.
--Chamber IV : -70°C
Elite
Applicable standards : GB/T12579, ASTM D892, ISO6247, NFT60129
Working unit : 4 units
Heating method : oil bath
Temperature controlling method : Imported digital PID
Temperature controlling accuracy : ±0.1°C
Tester Petroleum Equipment BJL1Q1 (BPTL-215)
Foam Tendency Bath Instrument With CoolerApplicable standards : GB/T12579, ASTM D892, ISO6247, NFT60129
Working unit : 4 units
Heating method : oil bath
Temperature controlling method : Imported digital PID
Temperature controlling accuracy : ±0.1°C
Elite
Sample quantity : It can determine 6 samples at a time
Temperature measuring component : Thermal resistance
Temperature control mode : Automatically controlled by digital temperature controller
Temperature control range : Ambient to 100°C
Temperature control accuracy : ±0.2°C
Tester Petroleum Equipment BJO1BG1 (BPTL-267)
Distillate Fuel Oils Oxidation Stability TesterSample quantity : It can determine 6 samples at a time
Temperature measuring component : Thermal resistance
Temperature control mode : Automatically controlled by digital temperature controller
Temperature control range : Ambient to 100°C
Temperature control accuracy : ±0.2°C
Elite
Applicable standards : SH/T0301, ASTM D2619
Heating mode : Stainless steel electrical heating tube
Heating power : 1.2KW
Temperature control range : Ambient~93°C
Temperature control accuracy : ±0.5°C
Tester Petroleum Equipment BJL1BN1 (BPTL-214)
Hydrolytic Stability TesterApplicable standards : SH/T0301, ASTM D2619
Heating mode : Stainless steel electrical heating tube
Heating power : 1.2KW
Temperature control range : Ambient~93°C
Temperature control accuracy : ±0.5°C
Elite
Applicable standard : SH/T0109, ASTM D1264
Temperature control accuracy : ±0.1°C
Temperature control range : Ambient~100°C
Working temperature : 37.8 ± 0.1°C and 79 ± 0.1°C
Rotating speed : 600 ± 30 rpm
Tester Petroleum Equipment BJL1BP1 (BPTL-225)
Water Washout Properties TesterApplicable standard : SH/T0109, ASTM D1264
Temperature control accuracy : ±0.1°C
Temperature control range : Ambient~100°C
Working temperature : 37.8 ± 0.1°C and 79 ± 0.1°C
Rotating speed : 600 ± 30 rpm
Elite
Heating rate: Procedure A : (5 ~ 6) °C/min
Heating rate: Procedure B : (1 ~ 1.5) °C/min
Heating rate: Procedure C : (3.0 ± 0.5) °C/min
Stirring rate: Procedure A and C : (90 ~ 120) rpm
Stirring rate: Procedure B : (250 ± 10) rpm
Tester Petroleum Equipment BJO1G1 (BPTL-238)
Automatic Pmcc Flash Point TesterHeating rate: Procedure A : (5 ~ 6) °C/min
Heating rate: Procedure B : (1 ~ 1.5) °C/min
Heating rate: Procedure C : (3.0 ± 0.5) °C/min
Stirring rate: Procedure A and C : (90 ~ 120) rpm
Stirring rate: Procedure B : (250 ± 10) rpm
Elite
Applicable Standards : ASTM D6082, SH/T0722
Temperature Control Method : Imported PID digital temperature controller
Temperature Control Accuracy : 150 ± 0.1°C
Heating Method : Liquid bath heating
Working Units : 2 tubes
Tester Petroleum Equipment BJL1BD1 (BPTL-217)
High Temperature Foaming ApparatusApplicable Standards : ASTM D6082, SH/T0722
Temperature Control Method : Imported PID digital temperature controller
Temperature Control Accuracy : 150 ± 0.1°C
Heating Method : Liquid bath heating
Working Units : 2 tubes
Elite
Applicable standards : ASTM D2274, ISO12205, SH/T0175
Temperature control method : Digital PID temperature controller
Circulating method : Magnetic pump circulation
Temperature control range : 20-95°C ±0.2°C
Working units : 6 tubes
Tester Petroleum Equipment BJL1BM1
Oxidation Stability TesterApplicable standards : ASTM D2274, ISO12205, SH/T0175
Temperature control method : Digital PID temperature controller
Circulating method : Magnetic pump circulation
Temperature control range : 20-95°C ±0.2°C
Working units : 6 tubes
Elite
Temperature control point for test bath : 140°C, 150°C
Temperature control accuracy : ±0.1°C
Range for pressure sensor : (0~1.6) MPa
Pressure accuracy : ±0.5%
Rotation speed : (100±5) r/min
Tester Petroleum Equipment BJL1BJ1
Oil Oxidation Stability TesterTemperature control point for test bath : 140°C, 150°C
Temperature control accuracy : ±0.1°C
Range for pressure sensor : (0~1.6) MPa
Pressure accuracy : ±0.5%
Rotation speed : (100±5) r/min
Elite
Test bomb : Can do 3 bomb tests at the same time
Water bath temperature : 37.8°C
Pressure range : (0 ~ 200) kPa or (0 ~ 29) psi
Temperature control accuracy : ±0.1°C
Ambient temperature : 15°C ~ 35°C
Tester Petroleum Equipment BJO1BF1 (BPTL-265)
Automatic Vapor Pressure Tester (reid Method)Test bomb : Can do 3 bomb tests at the same time
Water bath temperature : 37.8°C
Pressure range : (0 ~ 200) kPa or (0 ~ 29) psi
Temperature control accuracy : ±0.1°C
Ambient temperature : 15°C ~ 35°C
Elite
Freezing point range : -54°C ~ 2°C
Working bath : stainless steel, double vacuum glass observing window
Cold bath measurement temperature : -70°C ~ 30°C
Temperature controlling accuracy : ±0.1°C
Sample stirring : mechanical stirring (60 ~ 80) r/min, continuously adjustable
Tester Petroleum Equipment BJO1X1 (BPTL-256)
Automatic Freezing Point TesterFreezing point range : -54°C ~ 2°C
Working bath : stainless steel, double vacuum glass observing window
Cold bath measurement temperature : -70°C ~ 30°C
Temperature controlling accuracy : ±0.1°C
Sample stirring : mechanical stirring (60 ~ 80) r/min, continuously adjustable
Elite
Air supply : Nitrogen cylinder (or air compressor, compressed air bottle)
Pressure regulating range of reducing valve : (0~400) kPa
Electric agitator : Independently controlled for each way
Ultraviolet light source pipe : 1220mm in length, wavelength is 365mm±5nm
Illuminating lamp : 1220mm in length, power is 40W
Tester Petroleum Equipment BJO1BI1 (BPTL-269)
Liquid Petroleum Product Hydrocarbon TesterAir supply : Nitrogen cylinder (or air compressor, compressed air bottle)
Pressure regulating range of reducing valve : (0~400) kPa
Electric agitator : Independently controlled for each way
Ultraviolet light source pipe : 1220mm in length, wavelength is 365mm±5nm
Illuminating lamp : 1220mm in length, power is 40W
Elite
Applicable standards : GB/T2525, GB/T510, ASTM D97
Temperature controlling method : imported PID digital display temperature controller
Temperature controlling accuracy : -70±0.1°C
Refrigeration method : imported double compressor
Timing method : digital timer
Tester Petroleum Equipment BJL1S1 (BPTL-221)
Multifunctional Pour Point Test InstrumentApplicable standards : GB/T2525, GB/T510, ASTM D97
Temperature controlling method : imported PID digital display temperature controller
Temperature controlling accuracy : -70±0.1°C
Refrigeration method : imported double compressor
Timing method : digital timer
Elite
Applicable standards : GB/T3536, ISO2592, ASTM D92
Display mode : LCD
Display contents : Controlling temperature and expected set flash pointFault promptEvery model specifications and atmosphere setting
Measuring range : Ambient ~ 400°C
Measuring accuracy : 0.1°C
Tester Petroleum Equipment BJL1J1 (BPTL-203)
Fully Automatic Cleveland Open Flash Point MeterApplicable standards : GB/T3536, ISO2592, ASTM D92
Display mode : LCD
Display contents : Controlling temperature and expected set flash pointFault promptEvery model specifications and atmosphere setting
Measuring range : Ambient ~ 400°C
Measuring accuracy : 0.1°C
Elite
Temperature of coke chamber : 500°C
Temperature control accuracy : ±2°C
Heating power : 1200W
Ambient temperature : 5°C ~ 35°C
Relative humidity : ≤ 85%
Tester Petroleum Equipment BJO1BA1 (BPTL-259)
Carbon Residue Tester (micromethod)Temperature of coke chamber : 500°C
Temperature control accuracy : ±2°C
Heating power : 1200W
Ambient temperature : 5°C ~ 35°C
Relative humidity : ≤ 85%
Elite
Applicable standards : GB/T261, ISO2719, ASTM D93, DIN51751
Display mode : LCD big screen in English
Display content : Control temperature and set temperature of expected flash point; Fault warning; Each simulated parameters and pressure setting
Measuring range : 40~370°C
Measuring accuracy : ±0.1°C
Tester Petroleum Equipment BJL1M1 (BPTL-207)
Closed Cup Flash Point TesterApplicable standards : GB/T261, ISO2719, ASTM D93, DIN51751
Display mode : LCD big screen in English
Display content : Control temperature and set temperature of expected flash point; Fault warning; Each simulated parameters and pressure setting
Measuring range : 40~370°C
Measuring accuracy : ±0.1°C
Elite
Power supply : AC(220±10%)V, 50Hz
Maximum power consumption : ≤1700W
Test bomb : Can do 3 bomb tests at the same time
Water bath temperature : 37.8°C
Temperature control accuracy : ±0.1°C
Tester Petroleum Equipment BJL1BL1
Automatic Vapor Pressure TesterPower supply : AC(220±10%)V, 50Hz
Maximum power consumption : ≤1700W
Test bomb : Can do 3 bomb tests at the same time
Water bath temperature : 37.8°C
Temperature control accuracy : ±0.1°C
Elite
Heating Tube Power : ≤1000W, The actual heating power is automatically controlled by the computer
Measuring range of oxygen bomb pressure transmitter : (0 ~ 1600) kPa, accuracy: ±2%
Temperature control point of metal bath : 100.0°C ± 0.5°C
Thermometer : Mercury-in-glass thermometer, can correct coefficient as need
Ambient temperature : ≤40°C
Tester Petroleum Equipment BJO1CE1 (BPTL-266)
Automatic Gasoline Oxidation Stability Tester (induction Period Method)Heating Tube Power : ≤1000W, The actual heating power is automatically controlled by the computer
Measuring range of oxygen bomb pressure transmitter : (0 ~ 1600) kPa, accuracy: ±2%
Temperature control point of metal bath : 100.0°C ± 0.5°C
Thermometer : Mercury-in-glass thermometer, can correct coefficient as need
Ambient temperature : ≤40°C
Elite
Flash point measuring range : -30°C ~ +100°C
Precision of determination : Meets standard GB/T 5208
Temperature resolution : ±0.1°C
Igniting device : Electric igniting gun
Cooling mode : Semiconductor (No need for external cooling water)
Tester Petroleum Equipment BJO1H1 (BPTL-239)
Rapid Low Temperature Closed Cup Flash Point TesterFlash point measuring range : -30°C ~ +100°C
Precision of determination : Meets standard GB/T 5208
Temperature resolution : ±0.1°C
Igniting device : Electric igniting gun
Cooling mode : Semiconductor (No need for external cooling water)
Elite
Power Supply : AC (220±10%) V, 50Hz
Total Power Consumption : 1400W
Measuring Range of Oxygen Bomb Pressure Transmitter : (0~1600) kPa, Accuracy: ±2%
Temperature Control Point of Metal Bath : 100.0°C ±0.1°C
LCD Touch Screen : 10.1 inches
Tester Petroleum Equipment BJL1BB1
Gasoline Oxidation Stability TesterPower Supply : AC (220±10%) V, 50Hz
Total Power Consumption : 1400W
Measuring Range of Oxygen Bomb Pressure Transmitter : (0~1600) kPa, Accuracy: ±2%
Temperature Control Point of Metal Bath : 100.0°C ±0.1°C
LCD Touch Screen : 10.1 inches
Elite
Flash point measuring range : -10°C ~ +100°C
Temperature resolution : ± 0.1°C
Igniting device : Electric igniting gun
Cooling mode : Semiconductor (with cold water cycle at external connection)
Igniting source : Gas, LPG (or other civilian fuels)
Tester Petroleum Equipment BJO1BZ1 (BPTL-240)
Rapid Low Temperature Closed Cup Flash Point TesterFlash point measuring range : -10°C ~ +100°C
Temperature resolution : ± 0.1°C
Igniting device : Electric igniting gun
Cooling mode : Semiconductor (with cold water cycle at external connection)
Igniting source : Gas, LPG (or other civilian fuels)
Elite
Applicable standard : ASTM D6743, DIN 51528, SH/T0680, GB/T23971, GB/T23800
Temperature control method : imported PID digital temperature controller
Temperature control range : RT~400°C
Temperature control accuracy : ± 0.1°C
Heating method : metal bath
Tester Petroleum Equipment BJL1N1 (BPTL-209)
Thermal Stability Test EquipmentApplicable standard : ASTM D6743, DIN 51528, SH/T0680, GB/T23971, GB/T23800
Temperature control method : imported PID digital temperature controller
Temperature control range : RT~400°C
Temperature control accuracy : ± 0.1°C
Heating method : metal bath
Elite
Temperature range : -70~40°C
Resolution : 0.1°C
Pressure measuring range : 0~200.0 KPa; resolution 1Pa
Filter : 363 mesh stainless steel wire mesh
Refrigeration system : Fully sealed imported compressor refrigeration cycle unit
Tester Petroleum Equipment BJL1BO1
Automatic Cfpp TesterTemperature range : -70~40°C
Resolution : 0.1°C
Pressure measuring range : 0~200.0 KPa; resolution 1Pa
Filter : 363 mesh stainless steel wire mesh
Refrigeration system : Fully sealed imported compressor refrigeration cycle unit
Elite
Burette volume : 10ml
Burette precision : ±0.1%F•S
Burette dripping time : (60±20)S(F·S)
Potential measurement range : (0~±1800.0)mV
Basic error of electronic unit : 0.1%±0.5mV of full reading
Tester Petroleum Equipment BJO1BP1 (BPTL-277)
Total Acid Number TesterBurette volume : 10ml
Burette precision : ±0.1%F•S
Burette dripping time : (60±20)S(F·S)
Potential measurement range : (0~±1800.0)mV
Basic error of electronic unit : 0.1%±0.5mV of full reading
Elite
Applicable standards : SH/T 0059; ASTM D5800 B
Temperature range : Ambient ~ 300°C
Temperature setting : Resolution accuracy ±0.1°C; temperature accuracy ±0.5°C
Heating unit : Environmentally friendly lightweight heating unit
Vacuum control : Vacuum pump and pressure gauge air filter
Tester Petroleum Equipment BJL1L1 (BPTL-206)
Evaporating Loss TesterApplicable standards : SH/T 0059; ASTM D5800 B
Temperature range : Ambient ~ 300°C
Temperature setting : Resolution accuracy ±0.1°C; temperature accuracy ±0.5°C
Heating unit : Environmentally friendly lightweight heating unit
Vacuum control : Vacuum pump and pressure gauge air filter
Elite
Temperature control range of condensate circulating water : Ambient+5°C (Min. 30°C) ~ 80°C±3°C; adjustable
Working Mode of condensate trap : Semiconductor refrigeration
Minimum temperature : ≤ - 40 °C
Absolute pressure setting : 2 mmhg, 5 mmhg, 10 mmhg, 20 mmhg, 50 mmhg
Absolute pressure measurement range : (2.00~170.00) mmHg ± 0.01 mmHg automatic constant pressure
Tester Petroleum Equipment BJO1T1 (BPTL-252)
Vacuum Distillation TesterTemperature control range of condensate circulating water : Ambient+5°C (Min. 30°C) ~ 80°C±3°C; adjustable
Working Mode of condensate trap : Semiconductor refrigeration
Minimum temperature : ≤ - 40 °C
Absolute pressure setting : 2 mmhg, 5 mmhg, 10 mmhg, 20 mmhg, 50 mmhg
Absolute pressure measurement range : (2.00~170.00) mmHg ± 0.01 mmHg automatic constant pressure
Elite
Oil sample quantity : 6 ml
Powder sample quantity : 3 g
Detection limit : 50 ppm
Measuring range : 0.005% ~ 5%
Repeatability (r) : < 0.4347 x0.6446
Tester Petroleum Equipment BJO1BK1 (BPTL-271)
X-ray Fluorescence Sulfurin- Oil AnalyzerOil sample quantity : 6 ml
Powder sample quantity : 3 g
Detection limit : 50 ppm
Measuring range : 0.005% ~ 5%
Repeatability (r) : < 0.4347 x0.6446
Elite
Viscosity measurement range : 1500mPa·s ~27000mPa·s
Cold bath temperature control range : Ambient ~ -60°C
Cold bath temperature control accuracy : ±0.5°C
Stator temperature control accuracy : ±0.05°C
Environment temperature : 10°C~40°C
Tester Petroleum Equipment BJO1BQ1 (BPTL-278)
Automatic Engine Oils Apparent Viscosity TesterViscosity measurement range : 1500mPa·s ~27000mPa·s
Cold bath temperature control range : Ambient ~ -60°C
Cold bath temperature control accuracy : ±0.5°C
Stator temperature control accuracy : ±0.05°C
Environment temperature : 10°C~40°C
Elite
Test sample : Two-bomb design, can do two samples at one time. Convenient to do parallel test.
Rotation speed : (100±1)r/min
Included angle between oxygen bomb and water level : 30°
Range for pressure sensor : (0 ~ 1.6)MPa
Accuracy : ±2%
Tester Petroleum Equipment BJO1BH1 (BPTL-268)
Automatic Lubricating Oils Oxidation Stability TesterTest sample : Two-bomb design, can do two samples at one time. Convenient to do parallel test.
Rotation speed : (100±1)r/min
Included angle between oxygen bomb and water level : 30°
Range for pressure sensor : (0 ~ 1.6)MPa
Accuracy : ±2%
Elite
Applicable standards : ASTM D6138
Rotating method : AC motor drive
Rotating speed : 80~85r/min
Timing method : Digital timer
Start and Stop time : set at random
Tester Petroleum Equipment BJL1U1 (BPTL-223)
Lubricating Greases Corrosion-preventive Properties TesterApplicable standards : ASTM D6138
Rotating method : AC motor drive
Rotating speed : 80~85r/min
Timing method : Digital timer
Start and Stop time : set at random
Elite
Applicable Standards : SH/T 0220, JIS K2242 (or optionally ISO 9950)
Heating Method : Electric heating wire
Temperature Control Range : 80 ± 2°C, 810 ± 2°C
Control Method : Digital Display PID Automatic Temperature Control
Temperature Control Accuracy : 0.5%
Tester Petroleum Equipment BJL1BA1 (BPTL-218)
Fully Automatic Quenching Medium Cooling Performance TesterApplicable Standards : SH/T 0220, JIS K2242 (or optionally ISO 9950)
Heating Method : Electric heating wire
Temperature Control Range : 80 ± 2°C, 810 ± 2°C
Control Method : Digital Display PID Automatic Temperature Control
Temperature Control Accuracy : 0.5%
Elite
Applicable standards : SH/T0338, ASTM D1478
Refrigeration method : Imported French Tecumseh compressor unit
Temperature controlling range : ambient-70°C
Temperature control : Digital timer
Rotating speed : 1r/min
Tester Petroleum Equipment BJL1W1 (BPTL-226)
Low-temperature Torque TesterApplicable standards : SH/T0338, ASTM D1478
Refrigeration method : Imported French Tecumseh compressor unit
Temperature controlling range : ambient-70°C
Temperature control : Digital timer
Rotating speed : 1r/min
Elite
Temperature range of bath : 0 ~ 60°C
Temperature control precision of bath : ±0.5°C
Temperature range of receiving chamber : 0 ~ 60°C
Temperature control precision of receiving chamber : ±1°C
Distillate liquid detection : 0 ~ 100 ml, resolution 0.01 ml
Tester Petroleum Equipment BJO1Q1 (BPTL-249)
Automatic Distillation TesterTemperature range of bath : 0 ~ 60°C
Temperature control precision of bath : ±0.5°C
Temperature range of receiving chamber : 0 ~ 60°C
Temperature control precision of receiving chamber : ±1°C
Distillate liquid detection : 0 ~ 100 ml, resolution 0.01 ml
Elite
Applicable standard : SH/T0090, ASTM D1177, NFT 78102
Temperature control method : Imported PID temperature controller
Temperature control range : -70 ± 0.1°C
Refrigerator system : Imported dual air compressors
Sample stirring : Motor stirring
Tester Petroleum Equipment BJL1BF1 (BPTL-220)
Automatic Freezing Point TesterApplicable standard : SH/T0090, ASTM D1177, NFT 78102
Temperature control method : Imported PID temperature controller
Temperature control range : -70 ± 0.1°C
Refrigerator system : Imported dual air compressors
Sample stirring : Motor stirring
Elite
Sample injection quantity : Solid: 1-20 mg; Liquid: 5-20 μL; Gas: 1-5 mL
Determination method : Ultraviolet fluorescence method (S)
Measuring range : 5 ppm ~ 5000 ppm (High concentration should be diluted, low concentration gas sample is up to 0.1 ppm)
Temperature range : Ambient to 1150°C
Temperature control precision : ±1°C
Tester Petroleum Equipment BJO1BX1 (BPTL-403)
Ultraviolet Fluorescence Sulfurin-oil AnalyzerSample injection quantity : Solid: 1-20 mg; Liquid: 5-20 μL; Gas: 1-5 mL
Determination method : Ultraviolet fluorescence method (S)
Measuring range : 5 ppm ~ 5000 ppm (High concentration should be diluted, low concentration gas sample is up to 0.1 ppm)
Temperature range : Ambient to 1150°C
Temperature control precision : ±1°C
Elite
Applicable standards : GB/T6536; ASTM D 86, ISO 3405;
Measuring temperature : Ambient~+400°C
Temperature controlling accuracy : +/- 0.1°C
Volume accuracy : +/- 0.1 ml
Temperature of measuring cylinder : 0~60°C
Tester Petroleum Equipment BJL1Y1 (BPTL-231)
Fully Automatic Distilled Oil AnalyzerApplicable standards : GB/T6536; ASTM D 86, ISO 3405;
Measuring temperature : Ambient~+400°C
Temperature controlling accuracy : +/- 0.1°C
Volume accuracy : +/- 0.1 ml
Temperature of measuring cylinder : 0~60°C
Elite
Temp.controlling : Import PID temp.controller
Flow range : 8~12L/h±10%
Measuring range : 0~800 μS/cm
Resolution : 0.1μS/cm
Gas source : 10L/H with special membrane pump
Tester Petroleum Equipment BJL1X1 (BPTL-227)
Oil Oxidation Stability TesterTemp.controlling : Import PID temp.controller
Flow range : 8~12L/h±10%
Measuring range : 0~800 μS/cm
Resolution : 0.1μS/cm
Gas source : 10L/H with special membrane pump
Elite
Applicable Standard : SH/T0703, ASTM D5481
Heating method : Electric heating rod
Test temperature : Ambient to 150°C
Temperature control accuracy : ±0.1°C
Working unit : 5 tubes
Tester Petroleum Equipment BJL1BH1 (BPTL-104)
Apparent Viscosity TesterApplicable Standard : SH/T0703, ASTM D5481
Heating method : Electric heating rod
Test temperature : Ambient to 150°C
Temperature control accuracy : ±0.1°C
Working unit : 5 tubes
Elite
Power supply : AC(220±10%)V, 50Hz
Refrigeration : Semiconductor
Temperature control range : Room temperature ~ -40°C (-70°C is customized)
Temperature control accuracy : ±0.1°C
Measuring range : 0~40000 mPa·s
Tester Petroleum Equipment BJL1H1 (BPTL-201)
Scanning Brookfield Gelation Index Test InstrumentPower supply : AC(220±10%)V, 50Hz
Refrigeration : Semiconductor
Temperature control range : Room temperature ~ -40°C (-70°C is customized)
Temperature control accuracy : ±0.1°C
Measuring range : 0~40000 mPa·s
Tester Petroleum Equipment BJL1I1 (BPTL-202)
Shear Stability TesterApplicable standards : SH/T0103, ASTM D3945
Timing method : Automatic stroke timer
Refrigeration method : Air compressor
Temperature control range : 35±0.2°C
Flow control : Liquid flow meter