Get Price
CO2 Incubator BCAJ-301
CO2 incubators are widely used in scientific research to grow and maintain cell cultures. A Heal Force CO2 incubator provides you with unsurpassed natural simulation to ensure optimum growth conditions for your culture at all time. That's why they become the first choice of researchers in fields of application include tissue engineering, in vitro...
- Easy-to-clean design:
- The cleaning process is significantly simplified by Heal Force's unique, seamless, deep-drawn interior chamber, which reduces any areas where contamination could accumulate. Heal Force incubators offer the best usable-space-to-volume ratio due to the total absence of any additional fittings in the interior chamber.
- Inlet filter for CO2 supply:
- All gas injection lines are filtered via HEPA filter to remove impurities and contaminants before being injected into the chamber. The HEPA filter is able to filter particles larger than 0.3um at 99.998%.
- Up to 3-Year Product Warranty
- US & EU Compliance Standards
- Door-to-Door Shipping
Technical Specifications
Detailed operating and construction parameters for this model.
| Model | BCAJ-301 |
| Capacity | 151L |
| Temperature Range | 5°C above ambient temperature to 50°C |
| Construction | |
| Exterior dimensions (WxDxH, mm/inch) | 637x762x909 (25.1x30x35.8) |
| Interior dimensions (WxDxH, mm/inch) | 470x530x607 (18.5x20.8x23.9) |
| Interior Volume (cu.ft) | 5.3 cu.ft. |
| Net Weight | 80kg/176lbs |
| Interior Material | Type 304, mirror finish, stainless steel |
| Exterior Material | Electrolyzed galvanization steel, powder coated |
| Inner door | 3 inner doors standard |
| Temperature | |
| Heating method | Direct Heat & Air Jacket (DHA) |
| Temp. control system | Microprocessor |
| Temp. sensor | PT1000 |
| Temp. uniformity | ±0.2°C |
| Temp. stability | ±0.1°C |
| CO2 | |
| Inlet pressure | 0.1 MPa |
| CO₂ control system | Microprocessor |
| CO₂ sensor | Thermal conductivity |
| CO₂ range | 0 to 20% |
| CO₂ stability | ±0.1% |
| Humidity | |
| Humidifying system | Special designed water reservoir |
| Relative humidity | ≥95% |
| Water reservoir volume | 3L |
| Shelves | |
| Shelf dimensions (WxD, mm/inch) | 423x445 (16.7x17.5) |
| Shelf construction | Type 304, mirror finish, stainless steel |
| Standard/Maximum shelves | 3, 10 |
| Fittings | |
| Access port | Standard |
| Air filter | 0.3μm, Efficiency:99.998% (for CO₂) |
| Remote alarm contacts | Standard |
| De-contamination | 90°C moist heat disinfection |
| Rated power | 600W |
| Power supply | 220V/50Hz (standard), 110V/60Hz (optional) |
| Alarm system | Power interruption * High/Low temperature * Deviation of CO₂ * RH * Door ajar * Independent overheat protection |
| Data output | RS232 |
Product Features
Key design, performance, usability, and safety advantages.
Extra Information View additional product guidance, technical notes, diagrams, and supporting information.
Divided, inner glass door:
Three inner glass doors maintains stable climatic conditions, minimizes any changes to the humidity, heat and gas concentration, shortens recovery times significantly and also further reduces the risk of contamination.
90°C moist heat disinfection:
They are equipped with 90 C moist heat disinfection system. The validated overnight sterilization cycle ensures reliable destruction of germs that could interfere with your work and requires no extra work, such as removal of interior fittings. Mycoplasma is 100% eliminated in a routine disinfection cycle.
