Get Quote ▼

Viscometer Petroleum Equipment BPTL-107

Low Temperature Kinematic Viscometer
Viscosity of an oil is defined as its resistance to flow and Viscometer measures the flow. Monitoring viscosity is one of the most important components of any oil analysis program. Minute changes in viscosity at operating temperatures can be magnified to the extent that an oil is no longer able to provide adequate lubrication and efficiency in preventing...
  • The temperature of the constant temperature bath is controlled by the temperature controller, and the refrigeration and heating parts compensate each other to achieve heat balance and maintain a certain accuracy in controlling the bath temperature. The instrument can install two samples for test at the same time. The constant temperature bath is equipped with a stirring motor to make the temperature in the whole constant temperature bath uniform.
Old SKU: BJO1CC1
Specifications Features Applications Get Quote

Specifications

ModelBPTL-107
Capillary viscometer tubes (Pinkevitch viscometer)6 pieces in total and the diameters for each is 0.6, 0.8, 1.0, 1.2, 1.5, 2.0 mm.
Temperature range-65 °C ~ room temp
Temperature control accuracy± 0.1 °C
Ambient temperature15 °C ~ 35 °C
Relative humidity≤ 85 %
Heating deviceElectric heater; power ≤ 600 W
Refrigeration unitDouble refrigeration compressors
Temperature sensorRTD, Pt100
Constant temperature bathStainless steel
Maximum power consumption1700 W
Power supplyAC (220 ± 10%) V 50Hz
Dimension530x460x870 mm

Features

The temperature of the constant temperature bath is controlled by the temperature controller, and the refrigeration and heating parts compensate each other to achieve heat balance and maintain a certain accuracy in controlling the bath temperature. The instrument can install two samples for test at the same time. The constant temperature bath is equipped with a stirring motor to make the temperature in the whole constant temperature bath uniform.

Applications

Petroleum Industry, Oil and Gas Industry

Get Quote