Vertical Laminar Airflow BER-3602

1. Safety Warning Before Use

Must disable item

•Do not store volatile, flammable and explosive items in the equipment, otherwise it may cause an explosion or fire.

•Do not place the equipment in rain, wet or splash water, otherwise it may lead to leakage, short circuit or electric shock and other accidents.

•Non-professional technicians shall not disassemble, repair or modify the equipment, otherwise it may cause fire or electric shock due to improper operation.

Must obey item

•The equipment should be installed on solid ground. If the ground is not solid enough or the installation site is not suitable, the equipment may tip over and cause injuries.

•Please use the special power supply indicated on the nameplate of the equipment. The power outlet must be connected to the ground. The equipment must be reliably grounded to prevent accidental leakage of electricity resulting in electric shock or fire.

•Before any repair or maintenance of the equipment, be sure to disconnect the power supply to prevent electric shock or injury.

•Wear gloves when repairing or maintaining equipment to prevent injury caused by edges or sharp corners.

•If there is any abnormality in the operation of the equipment, pull out the power plug immediately and stop the operation of the equipment. Operating under abnormal conditions may cause electric shock or fire.

2. Main Technical Parameters

Table 1

3. Main Features of the product

1. The box body adopts the overall steel structure, and the surface is sprayed. At the top of the box, there are bellows and a quiet pressure box, and in the quiet pressure box there are HEPA filters.

2. The working table adopts the fan system with adjustable wind speed. The tact switch adjusts the voltage to keep the average wind speed in the working space stable within the ideal range, thereby extending the service life of the air filter, maintaining high efficiency and reducing the operating cost of the workbench.

3. The worktable is made of high quality stainless steel, beautiful and durable.

4. The workbench uses ultraviolet radiation, which can emit a strong 2537 short-wave ultraviolet, which not only kills the active cells of microorganisms, but also kills the buds and other fungal spores with heat resistance function. In addition, bacterial phages and viruses can be rapidly broken under UV light.operation expenses of the worktable.

5. The mesa of the worktable is made of high-quality stainless steel, which is attractive and durable.

6. The worktable adopts ultraviolet radiation which can radiate the strong 2537 short-wave ultraviolet rays, it not only kills active cells of microorganisms, but also kills buds and other fungus spores, which have the function of resisting heat. In addition, the bacteria phage and virus can break rapidly under the ultraviolet.

4. Instrument operation and usage instructions

Figure 1

1. [FANS] : Wind speed adjustment key, in the main interface display state,

2. [▲] : Add key, click this key to increase the wind speed.

3. [▼] : Reduce the key, click this key to reduce the wind speed.

4. [UV] : Sterilization key, press the UV sterilization lamp to open, the front door rises the sterilization lamp to close.

5. [LIGHT] : Light button, press to turn on the light.

Press the FANS key to enter the wind speed adjustment interface, you can adjust the wind speed through the ▲▼ key; Press the UV key to open sterilization; The glass door is raised up, and the sterilization lamp is closed; Press the LIGHT key to turn the lighting on.

5. Fault Treatment

Table 2