Get Price
DO Meter BMET-404
Benchtop Do Meter
The DO meter is used to measure the dissolved oxygen in water in order to reflect its quality. Its principle needs cathode and anode electrodes and works on the concept of polarization. The flow of electrons from the anode to the cathode represents the measuring signal which is proportional to the partial pressure of oxygen in the measured culture of media.
Key Features
SKU: BMET-404
Old SKU: BJG1S1
Pricing & Resources
- Up to 3-Year Product Warranty
- US & EU Compliance Standards
- Door-to-Door Shipping
Recently Shipped To:
🇧🇩 Bangladesh , 🇸🇦 Saudi Arabia , 🇮🇪 Ireland , 🇮🇸 Iceland
Get Quote
Download Catalog
Technical Specifications
Detailed operating and construction parameters for this model.
| Model | BMET-404 |
| Dissolved Oxygen Concentration | |
| - Sensor Type | Polarographic |
| - Range | 0.00 to 20.00 mg/L |
| - Resolution | 1.01 mg/L |
| - Accuracy | ± 0.3 mg/L |
| - Calibration Points | Air-saturated water or zero point |
| - Barometric Compensation | Yes |
| - Manual Salinity Factor Correction | Yes |
| Saturation | |
| - Range | (0.0 to 200.0)% |
| - Resolution | 0.10 % |
| - Accuracy | ± 10.0 % |
| Temperature | |
| - Range | -5 to 110 °C, 23 to 230 °F |
| - Unit | °C, °F |
| - Resolution | 0.1 |
| - Relative Accuracy | ± 0.2 |
| Measurement | |
| - Reading Mode | AutoRead, Continuous |
| - Reading Prompts | Reading, Stable, Locked |
| - Temp. Compensation | ATC, MTC |
| Data Management | |
| - Data Storage | 200 results each |
| Inputs | |
| - pH Electrode | BNC(Q9) |
| - Temp. Probe | 4-pin aviation connector |
| - Temp./DO Probe | 4-pin aviation connector |
| Display Options | |
| - Backlight | Yes |
| - Auto Shutdown | 300, 600, 1200, 1800, 3600 sec, off |
| - IP Rating | IP65 |
| General | |
| - Power | Rechargeable Lithium batter; AC Adapter, 100-240 V AC input, DC5V output |
| - Dimensions | 80 x 255 x 35 mm |
| - Weight | 400 g (0.88 lb) |