Get Price
Concentrator BCON-102
Sample Concentrator
Sample Concentrator (96-gas-needles)is mainly used for concentrating or preparing sample in batch. Such as drug screening, hormone analysis, liquid phase and mass spectrometry in the analysis of sample preparation. It works by blowing nitrogen in the surface of sample which is being heated to accelerate evaporating and separating the solvent in the samples...
Key Features
- The heater heats the sample rapidly to the evaporation temperature, and at the same time, the gas is blown to the surface of the solution through the gas needle, which promotes rapid evaporation of the solution and concentration of the sample.
- The height of the air cavity can be adjusted. The length of a standard gas needle is 80mm.
- The entire equipment can be put into ventilation cabinet when the concentration sample in toxic solvents.
- Built in overheat protection, automatic fault detection and fault beep alarm devices.
SKU: BCON-102
Old SKU: BFA1CF1
Pricing & Resources
- Up to 3-Year Product Warranty
- US & EU Compliance Standards
- Door-to-Door Shipping
Technical Specifications
Detailed operating and construction parameters for this model.
| Model | BCON-102 |
| Temp. Control Range | R.T.+5°C~150°C |
| Temp. Setting Range | 5°C~150°C |
| Temp. Stability@40~100°C | ±0.5 °C |
| Temp. Stability@100~150°C | ±1 °C |
| Block Temp. Uniformity@100°C | ±0.5 °C |
| Block Temp. Uniformity@150°C | ±1 °C |
| Temp. Display Accuracy | 0.1 °C |
| Heating Speed | <30min (40°C to 150°C) |
| Time Range | 1min ~99h59min |
| Air cavity Max. Lift Stroke | 275mm |
| Gas-in Joint Outer Diameter | Φ7mm |
| Nitrogen Pressure | <0.1MPa |
| Nitrogen Flow Rate | 0 ~10L/min |
| Needle Length | 80mm |
| Sample Capacity | 1 Standard Plate Block |
| Voltage | AC 220V/AC 110V, 50/60Hz |
| Power | 400W |
| Fuse | 250V, 3A/6A, Φ5x20 |
| Dimension (WxDxH) | W.220 x D.260 x H.445mm |
| Net Weight | 5.5kgs |
Product Features
Key design, performance, usability, and safety advantages.
The heater heats the sample rapidly to the evaporation temperature, and at the same time, the gas is blown to the surface of the solution through the gas needle, which promotes rapid evaporation of the solution and concentration of the sample.
The height of the air cavity can be adjusted. The length of a standard gas needle is 80mm.
The entire equipment can be put into ventilation cabinet when the concentration sample in toxic solvents.
Built in overheat protection, automatic fault detection and fault beep alarm devices.
LED displays immediate temperature and diminishing time.
Accessories For Purchase View compatible optional accessories and additional items available separately.
| Images | Spec | Dia. of hole | Name | Block dimension |
 | 0.2ml x96 | 6.7mm | Cone bottom | 95.5 x 153.5 x 33.5mm |
 | Flat bottom plates | Top size 76x116 x 4mm | Flat plate block | 95.5 x 153.5 x 22.5mm |