Get Price
CO2 Incubator BER-1401
Co2 Incubator
Key Features
- 1. Full-color 5.0-inch touch screen.
- 2. Standard imported infrared high-precision CO2 concentration sensor.
- 3. Has three levels of authority management function, with ultraviolet sterilization, wet heat sterilization, high temperature sterilization and three sterilization methods.
- 4. Six side heating air jacket heating system, while the design of a reasonable air duct mechanism, good temperature uniformity, heating, rapid return temperature.
- 5. Adopts chassis reservoir design with large evaporation area and fast moisture return. With a door heating device, can avoid the inner door glass condensation. The product is equipped with high efficiency filter and intake filter to ensure the cleanliness of the air in the working room.
SKU: BER-1401
Old SKU: BER1O1
Pricing & Resources
- Up to 3-Year Product Warranty
- US & EU Compliance Standards
- Door-to-Door Shipping
Technical Specifications
Detailed operating and construction parameters for this model.
| Model | BER-1401 |
| Capacity | 50L |
| Temperature Range | RT+5-55°C |
| Temperature Accuracy | |
| Heating Mode | Air Jacket |
| Function | |
| Temp. Resolution Ratio | 0.1°C |
| Temp. Fluctuation | ±0.1°C |
| Temp. Uniformity | ±0.3°C |
| CO2 Sensor | Infrared Sensor/measuring range: 0.0~21.0% |
| CO2 control range | 0.0-20.0% |
| CO2 control accuracy | ±0.1% |
| Structure | |
| Inner Chamber | Heating steel |
| Quter Shell | Cold-Roll Steel Sheet,Surface electrostatic spraying |
| Insulation Layer | Polyurethane |
| Heater | Heating sheet |
| Humidity Method | Disk humidifier |
| Power Rating | 0.4kW |
| Gas vent | Φ27mm rear (with test hole function) |
| Other | HEPA filter |
| Controller | |
| Temp. Control Mode | PID control |
| Temp. Setting Mode | 5.0-inch touch screen |
| Temp. Display Mode | Temperature displayed on left, concentration displayed on right screen |
| Timer | 0-9999 minutes (with timing wait function) |
| Operation Function | Fixed value operation, timed operation, automatic stop |
| Sterilization function | UV sterilization, wet heat sterilization, Sterilization at high temperature 140/180°C |
| Additional Function | Sensor deviation correction, temperature overshoot self-tuning, internal parameter locking, power off parameter memory. |
| Sensor | PT100, water level sensor, infrared CO2 sensor |
| Safety Device | High temperature alarm, concentration alarm, other alarm |
| Specification | |
| Inner Chamber size(W*L*H)(mm) | 345*375*388 |
| Exterior Size (W*L*H)(mm) | 500*500*655 |
| Packing Size (W*L*H)(mm) | 620*620*855 |
| Max. Shelf Number | 4 |
| Load Per rack | 15kg |
| Shelf Space | 35mm |
| Power Rating (50/60HZ) | AC220V/1.8A |
| NW/GW (kg) | 55/70 |
| Accessory | |
| Shelf | 2 |
| Shelf Frame | 4 |
| Optional accessories | (Optional 90°C wet heat sterilization carbon dioxide infrared sensor ) Separator, printer |
Product Features
Key design, performance, usability, and safety advantages.
1. Full-color 5.0-inch touch screen.
2. Standard imported infrared high-precision CO2 concentration sensor.
3. Has three levels of authority management function, with ultraviolet sterilization, wet heat sterilization, high temperature sterilization and three sterilization methods.
4. Six side heating air jacket heating system, while the design of a reasonable air duct mechanism, good temperature uniformity, heating, rapid return temperature.
5. Adopts chassis reservoir design with large evaporation area and fast moisture return. With a door heating device, can avoid the inner door glass condensation. The product is equipped with high efficiency filter and intake filter to ensure the cleanliness of the air in the working room.